Partial air-conditioning in the halls and enclosed entrances ensure that all facilities are both functional and comfortable regardless of the season or weather. Exhibitors throughout the grounds are supplied with electricity, water and compressed air through a functional system of floor/ground conduits. The most modern information technology for transmitting data, voice and images as well as WLAN technology are standard in all halls. Naturally, innovative communications technology ensures optimum, high-speed connections between market partners at all times.
Description of halls and outdoor exhibition site
Halls
A1-A6 B1-B5
B6 (high hall)
C1-C3
C4
B0 (ICM)
Length
161 m
161 m
143 m
139 m
65 m
Width
71 m
71 m
71 m
71 m
54 m
Total exhibition area
approx. 11,000 m²
approx. 11,000 m²
approx. 10,000 m²
approx. 10,000 m²
approx. 3,500 m²
Clearance height of longitudinal walls (along edge of hall between entrances)
approx. 5.70 m
approx. 7.80 m
approx. 5.70 m
approx. 5.70 m
approx. 4.00 m (edge of hall)
Clearance height of hall grider supports (along sides of hall)
approx. 10.75 m
approx. 15.25 m
approx. 10.75 m
approx. 10.75 m
-------
Clearance height of beam ties (hall center)
approx. 11.5 m
approx. 16 m
approx. 11.5 m
approx. 11.5 m
approx. 4.20 m (hall center)
Hall floor covering
Mastic asphalt
Mastic asphalt
Mastic asphalt
Mastic asphalt
Parquet
Permissible floor load
5 t/m² (50 kN/m²)
5 t/m² (50 kN/m²)
5 t/m² (50 kN/m²)
5 t/m² (50 kN/m²)
2 t/m² (20 kN/m²)
Permissible point load (0.3 x 0.3 m) (does not apply to utility duct covers)
10t (100 kN)
10t (100 kN)
10t (100 kN)
10t (100 kN)
8t (80 kN)
Permissible vertical load per suspension point
100 kg (1KN)
100 kg (1KN)
100 kg (1KN)
100 kg (1KN)
100 kg (1KN)
Entrance gates:
Vehicle access: (size) and [number]
(4.5 x 4.5m) [6]
(4.5 x4.5m) [8]
(4.5 x 4.5m) [6]
(4.5 x 4.5m) [8]
-------
No vehicle access (size) and [number]
(2.5 x 4.5m) [6]
(2.5 x 4.5m) [2]
(2.5 x 4.5m) [4]
(2.5 x 4.5m) [2]
(12.5x 4 m) [1]
Artificial illumination
100 Lux/m²
100 Lux/m²
100 Lux/m²
100 Lux/m²
400 Lux/m²
Ventilation
Partially air-conditioned
Partially air-conditioned
Partially air-conditioned
Partially air-conditioned
Partially air-conditioned
Utilities supplied via ducts that cross halls at right angle to longitudinal walls. Distance between duct centers:
Separate technical guidelines apply to the foyer of the ICM. Floors – Permissible loads – Gates
General: With the exception of Hall B0, motor vehicles can be driven into the halls. However, doing so is only permissible at walking pace. The underfloor utility ducts can withstand the weight of a vehicle when covered. With an evenly distributed load, their load-bearing capacity corresponds to that of the general load-bearing capacity of the floor in question. The maximum point loads posted for the hall floors does not apply to the areas near the utility ducts.
The weight limits posted for the passenger and freight elevators may not be exceeded under any circumstances. Passenger elevators and escalators may not be used to transport freight.
Any damage caused by non-compliance with these guidelines must be remedied by MMG at the expense of the exhibitor and/or his agents.
A description of the halls and the outdoor exhibition area can be download here: PDF file
Print
Send page via E-mail
Top
analytica China 
analytica Vietnam 
analytica Anacon 
analytica-world.com 
